Advantech Data Acquisition Modules ADAM 4000 - Manual (Page 116)

Chapter
4
Chapter 4 Command Set 4-13
ADAM-4016 Command Table (Continued)
Command Syntax Command Name Command Description Page No.
@AADI Read Digital I/O And
Alarm Status Ask the addressed module to return
the state of its four digital output
channels and the status of its alarm 5-50
@AADO(data) Set Digital Output
Values
Set the values of the module's four
digital outputs (ON or OFF) 5-52
@AAEAT Enable Alarm Enable the alarm in either
monentary or latching mode 5-54
@AAHI(data) Set High Alarm Value Download the high alarm limit value 5-56
@AALO(data) Set Low Alarm Value Download the low alarm limit value 5-57
@AADA Disable Alarm Disable all alarm functions 5-58
@AACA Clear Latch Alarm Reset the module's latch alarm to
zero 5-59
@AARH Read High Alarm
Value
Ask the addressed module to return
its high alarm value 5-60
@AARL Read Low Alarm
Value
Ask the addressed module to return
its low alarm value 5-61