Advantech Data Acquisition Modules ADAM 4000 - Manual (Page 129)

Command Set
4-26 ADAM 4000 Series User’s Manual
ADAM-4024 Command Table (Continued)
Command Syntax Command Name Command Description Page
No.
$AAACnZ EMS Flag setting Enable/Disable
(Z=1/0)
CHn EMS Flag
6-21
$AABCn Read EMS Flag Read CHn EMS Flag
6-21
$AADCn Read startup
data Read Back CHn StartUp Data 6-21
$AAECn Read emergency
Stop Read Back CHn Emergency
Stop Data
6-21
$AAG Reset Current
Trim Reset Current Trim Data
Variable To 0
6-21
$AAH Read Current
Trim Read Current Trim Data
Variable
6-21
$AAI Read IDI Read IDI
6-21
$AANCn Read 4mA
Calibration
Parameter Read Back CHn 4mA
Calibration Parameter 6-21
$AAOCn Read 20mA
Calibration
Parameter Read Back CHn 20mA
Calibration Parameter 6-21
$AAPCn Clear 4mA
Calibration
Parameter Clear CHn 4mA Calibration
Parameter/EEPROM
6-21
$AAQCn Clear 20mA
Calibration
Parameter Clear CHn 20mA Calibration
Parameter/EEPROM 6-21
$AAXnnnn Watchdog Timer
Setting Set communication WDT cycle
time from 0000 ~ 9999 (unit: 0.1
second. if value is 0000, the
communication WDT function
will be disable)
6-21
$AAY Read Watchdog
Timer Setting Read the cycle time setting of
communication WDT
6-21