Advantech Data Acquisition Modules ADAM 4000 - Manual (Page 117)

Command Set
4-14 ADAM 4000 Series User’s Manual
ADAM-4017 Command Table
Command Syntax Command Name Command Description Page No.
%AANNTTCCFF Configuration Set the address, input range, baud
rate, data format, checksum status
and/or integration time for the
specified analog input module 5-4
$AA2 Offset Calibration Return the configuration
parameters for the specified
analog input module 5-9
$AAF Read Channel Status Return the firmware version code
from the specified analog input
module
5-11
$AAM Read Version Return the module name from the
specified analog input module 5-12
#AA from Channel N Return the input values from all
channels of the specified analog
input module 5-13
#AAN Read Analog Input Return the input value from
channels number N of the
specified analog input module 5-15
$AA5VV Configuration Status Enables/disables multiplexing
simultaneously for seperate
channels of the specified input
module
5-16
$AA6 Enable/disable
Channels for
Multiplexing
Ask the specified input module to
return the status of all eight
channels 5-17
$AA0 Read Analog Input
from all Channels
Calibrate the analog input module
to correct for gain errors 5-18
$AA1 Span Calibration Calibrate the analog input module
to correct for offset errors 5-19