Advantech Data Acquisition Modules ADAM 4000 - Manual (Page 149)

Chapter
5
5-3
ADAM 4000 Series User’s Manual
Command
Syntax Command Description I/O Module
$AA4 Returns the value that was
stored in the specified module's
register after the #** command 4011, 4011D, 4012, 4013, 4015,
4015T, 4016
$AAB Ask the module to respond
whether the wiring is open or
closed 4011D, 4015, 4015T, 4018+,
4019+
$AA3 Returns the value of the CJC
sensor for a specified analog
input module 4011, 4011D, 4018, 4018+,
4018M, 4019+
$AA9 Calibrates the CJC sensor for
offset errors 4011, 4011D, 4018, 4018+, 4018M
4019+
$AA0Ci Calibrates a specified channel
to correct for gain errors 4015, 4015T, 4017+, 4018+, 4019+
$AA1Ci Calibrates a specified channel
to correct for offset errors 4015, 4015T, 4017+, 4018+, 4019+
$AA7CiRrr Configure the input type and
range of the specified channel
in an analog input module 4015, 4015T, 4017+, 4018+, 4019+
$AA8Ci Get the input type and range of
the specified channel in an
analog input module 4015, 4015T, 4017+, 4018+, 4019+
$AAXnnnn Communication Watchdog Timer
Setting 4015, 4015T, 4017+, 4018+,4019+
$AAY Read Communication Watchdog
Timer Setting 4015, 4015T, 4017+, 4018+, 4019+
$AAS0 Internal self-calibration for offset
and gain errors 4015, 4015T
$AAS1 Reload factory default
calibrating parameter to
overwrite current calibrating
parameter
4015, 4015T