KT&C KVR-1601S - Manual (Page 107)

107
 Users are able to select the one from the 3 types of sensitivity level; Super, High and Standard.
6.9 E-Map
6.9.1 Overview
 The ‘Map Viewer’ program is to display event signals over map images so that users may acknowledge event status more
easily.
 Users may recognize event occurrence with visual notifications on icons over the map image and audible notifications on
speaker system of a PC. By clicking on the camera icons on the map, users may launch ‘Instant Viewer’ window.
 To utilize ‘Map Viewer’ properly, users should configure map before running ‘Map Viewer’ program.
(Please refer to Local setup – E-map in chapter 6.4.5)
6.9.2 Controls
 Users can load the Map Viewer which was set up “in Local Setup - E-Map” by clicking right mouse button on the map in the
map list.
 Users can check the information of the device connected E-map in the right side of the Map viewer such as Device status,
name, IP / Domain, the maximum number of Camera, Alarm in / out and Audio.
6.9.3 E-map Camera – Instant Playback
 Users are able to load the instant viewer by clicking the camera icon on the map.