KT&C KVR-1601S User Manual
Page 64
64
Link Notification displays E-mail addresses registered in System>General>Account>User>Email
Please follow the setup procedures below.
⑨ Click (
) Drop-down list of camera box and select Cam 1.
⑩ Select alarm outputs to be worked when video loss is occurred to cam 1. Please check a check box of use column on
Alarm Out box. More than two alarm outputs can be set. If Click (
) ‘All’ of use box, all items are checked/unchecked at
once
⑪ Select cameras for preset when video loss is occurred to cam 1. Please check a check box of use column on Preset
box. More than two cameras can be set. If Click (
) ‘All’ of use box, all items are checked/unchecked at once
⑫ Click (
) Drop-down list of Preset to change Cameras preset. If Click ( ) Drop-down list of all preset box, all items are
changed at once
⑬ Select group for notification when video loss is occurred to cam 1. Please check a check box of E-Mail box. More than
two Groups can be set.
Repeat the above procedure for Cam 2 ~ Cam 16.
Click ( ) Copy to All CH button to copy Notification to all channels.
Click Beep Off to deactivate alert sounds from video loss. Apply to all channels.