KT&C KVR-1601S - Manual (Page 26)

26
2.2 Connector Wiring
2.2.1 Video-In/Loop Out Connections
S, A, B, C and D Type
 Connect Analog camera to ‘VIDEO IN’.
 If a user wishes to link a camera input to another device, use ‘LOOP OUT’. (C and I Type).
 Assure the ‘VIDEO IN’ (top connector) and ‘LOOP OUT’ (bottom one) connections are connected properly, not opposite way.
E, F, G and H Type
 Connect HD-SDI cameras to ‘HD-SDI IN’ from channel 1 to 16.
I Type
 Connect HD-SDI cameras to ‘HD-SDI IN’ from channel 1 to 4.
 Connect Analog cameras to ‘VIDEO IN’ from channel 5 to 16.
J Type (True Hybrid)
 Connect HD-SDI or Analog cameras to ‘any’ from channel 1 to 16.
NOTE
Only C and I Type model supports LOOP OUT connection.
NOTE
Please reboot the DVR, when switch from HD-SDI to Analog or Analog to HD-SDI (J type only)
2.2.2 HD-SDI Input Signal detection (E, F, G, H, I and J Type)
 These types of DVRs automatically detect the video signals of 720P 24, 720P 25, 720P 30, 720P 50, 720P 60, 1080i 50, 1080i
60, 1080P 24, 1080P 25, 1080P 30, 1080P 50, 1080P 60 (Auto Detection) when the system starts.
 720P and 1080P HD-SDI inputs can be used simultaneously with no restriction.
NOTE
1080i input cannot be used simultaneously with 720P and/or 1080P and does not support digital zoom in live mode.
(E (8, 16CH) and F (8, 16CH) Type)
2.2.3 Monitor Connections (Video Out, VGA and Multi Spot)
 Video Out (S, A, B, C, D, G, H, I and J Type Only)
- Use with the CCTV monitor.
- Connect BNC cable between CCTV monitor and ‘VIDEO OUT’ of the DVR.
 VGA
- Use with the computer monitor.
- Connect VGA cable between computer monitor and ‘VGA’ of the DVR
 Spot (S Type Only)
- This function supports one Channel Display on Spot Monitor
- Connect BNC cable between spot monitor and spot port of rear panel.
 Multi Spot (A, B, C, D, G (4 CH) and J Type Only)
- This function supports Multi-Channel Display on Spot Monitor
- Connect BNC cable between spot monitor and multi spot port of rear panel.
CAUTION
BLACK SCREEN WILL DISPLAY IF THE MONITOR DOES NOT SUPPORT THE SELECTED RESOLUTION. IN ORDER TO CHANGE
THE RESOLUTION PLEASE PRESS “REW>FF>BACKWARD>FORWARD” IN SERIES USING FRONT BUTTON OR REMOTE
CONTROLLER THEN THE RESOLUTION WILL BE CHANGED TO ‘1024 X 768’.