KT&C KVR-1601S - Manual (Page 181)

181
 Vertical Frequency Auto-Track
 PTZ control with Pelco C supporting PTZ camera
 Free Voltage 12VDC, 1A
 Compact Size & Light Weight
13.3.3 Technical Specification
Model HSC 2110
Input Signal
Analog Input 75Ω, 1Vp-p/BNC-F, 1CH
NTSC or PAL (Auto Detection)
Output Signal HD-SDI SMPTE 292M
Output Format 1080p 30
Input Return Loss (BNC) >-15dB, 270 Mb
Output Return Loss (BNC) >-15dB, 1.5 Gb
Input Impedance (BNC) 75 Ohms +/- 1%
Output Impedance (BNC) 75 Ohms +/- 1%
Power Consumption Free Voltage 12VDC, 1A
Dimension (W*H*D) 83.5mm x 31.5mm x 86.9mm
HD-SDI Connector BNC Female
13.3.4 Unpacking
 This equipment is an electronic appliance, so it should be handled with special care.
13.3.5 Service
 If there is any problem in the product, please contact a supplier or a distributor.
13.3.6 System Dimension Diagram
13.3.7 Connector Wiring
13.3.7.1 1 In / 1 Out Analog to HD-SDI Connection
 Connect a ‘VIDEO OUT’ of analog device to ‘VIDEO IN’ of HSC 2110 using 75ohm coaxial cable.
 Connect an ‘HD-SDI OUT’ of HSC 2110 to ‘HD-SDI IN’ of the HD-SDI DVR using 75ohm coaxial cable.