KT&C KVR-1601S - Manual (Page 62)

62
⑦ Click (  ) Drop-down list of Duration box to set the duration of recorded data for attached EXE
⑧ Select Local Actions
-Beep: When selected Camera detects Motion, it will give the alarm sound
-Popup: When selected Camera detects Motion, it will make the popup screen on the main monitor
-Message: When selected Camera detects Motion, the Motion message will pop up on the OSD
 Repeat the above procedure for Cam 2~ Cam 16
 Click ( ) Copy to All CH button to copy Notification & Local Actions to all channels.
4.5.3 EMERGENCY
 Please Click ( ) RELAY>EMERGENCY and the following screen will display.
 Select Alarm out, Preset and Notification to use when Emergency button pressed.
 Link Notification displays E-mail addresses registered in System>General>Account>User>Email
 Please follow the setup procedures below.
① Select alarm outputs to be worked when Emergency button is pressed. Please check  a check box of use column on
Alarm Out box. More than two alarm outputs can be set. If Click (  ) ‘All’ of use box, all items are checked/unchecked at
once
② Please check  a check box of use column on Preset box. More than two cameras can be set. If Click ( ) ‘All’ of use
box, all items are checked/unchecked at once
③ Click (  ) Drop-down list of Preset to use Cameras preset. If Click ( ) Drop-down list of all preset box, all items are
changed at once
④ Select group for notification when video loss is occurred. Please check  a check box of E-Mail box. More than two
Groups can be set.
⑤ Click (  ) Drop-down list of E-mail Attachment box to attach None, JPEG or EXE.
⑥ Click (  ) Drop-down list of Duration column to set the duration of recorded data for attached EXE
⑦ Select Local Actions
-Beep: When Emergency is occurred, it will give the alarm sound
-Message: When Emergency is occurred, the Emergency message will pop up on the OSD