KT&C KVR-1601S - Manual (Page 67)

67
5.1.5 Pan / Tilt / Zoom Control
 Press PTZ key to operate a PTZ camera connected to DVR. PTZ operations are only available in the full screen format.
 In Pan/Tilt mode, the icon is displayed on the bottom of the screen.
 Please refer the below for PTZ OSD menu.
Key Function
Up/Down/Left/Right rotation
Zoom out
Zoom in
Focus Far
Focus Near
Iris Close
Iris Open
Save Preset
Go to the Preset
Go to OSD main menu
Run Group Tour 1~9
Run Pattern 1~9
 To use a mouse in Pan/Tilt mode, select and double click a channel first. Right Click on selected channel to open Channel
menu then Click “PTZ” to activate PTZ control OSD menu. A key pad control will show as follows:
 To add new preset, select Preset No and button Click.
 To move to preset, select preset No and button Click.