KT&C KVR-1601S - Manual (Page 128)

128
 Click ‘Connect’ to connect the DVR to the ‘xCMS’.
 To have multiple channels, please choose the channel from the bar below the ‘Live Display’ screen (1, 4, 9, 16, 25, 36, 64
and Full).
 Full Screen Mode: Select a channel and Click on number “1” button. Then, the corresponding channel will display in Full
Screen.
 Quad Screen Mode: Click on No.4 button and a quad screen will display. The quad screen is in combination of 1~4, 5~8,
9~12 and 13~16. If users select Channel No. 7 and Click the button, 5~8 quad screen will display. Similarly, if users select
Channel No. 16, 13~16 quad screen will display.
 9-Split Screen Mode: Click on No.9 button and 9-split screen will display. The 9-split screen is in combination of 1~9 and
8~16. If users select Channel No. 9 and Click the button, 1~9 split screens will display. Similarly, if users select Channel No.
10, 8~16 split screens will display.
 16-Split Screen Mode: Click on No.16 button and 16-split screens will display.
 25-Split Screen Mode: Click on No.25 button and 25-split screens will display.
 36-Split Screen Mode: Click on No.25 button and 36-split screens will display.
 64-Split Screen Mode: Click on No.64 button and 64-split screens will display.
 Seq: Click ‘Seq’ and then it will show an ordered list of display which will change the channel of live display to next channels.
For example, In 4 channel display, CH5 to CH8 on the display screen will change to CH9 to CH12 sequently.
NOTE
The selected channel is outlined in blue