KT&C KVR-1601S - Manual (Page 29)

29
2.2.16 Connections Guideline
 Video out Connector: If only the monitor is connected to VIDEO OUT connector, please set the impedance switch on the rear
side of the monitor to 75 ohms to prevent abnormally bright or collapsed images. If wish to connect another device (e.g., a
recorder) to the back of the monitor, please set the impedance switch on the rear side of the monitor to HIGH Z (High
Impedance) and set the last device to 75 ohms.
 Alarm Input Connector: Do not input any type of voltage to the AI 1~AI4 (AI 16) connectors.