KT&C KVR-1601S - Manual (Page 41)

41
Firmware
 Users may upgrade DVR when it is required.
 Please follow the Upgrade process below.
① Plug USB memory stick which has a proper firmware file.
② Click (  ) Then, software version stored in the USB will display on the left-hand side.
③ Click (  ) to start the upgrade.
④ Popup message box will display and ask to proceed. Click ’OK’ to proceed.
⑤ When the upgrade is completed, a message box will display. Please Click ‘OK’ button and DVR will auto-reboot.
NOTE
Upgrade file must be placed inside USB without folder. Otherwise SYSTEM will not be able to recognize the file.
CAUTION
DO NOT UPGRADE UNTIL A HARD DISK DRIVE IS INSTALLED. MAKE SURE TO UPGRADE WHEN HDD IS IN PROPER OPERATION.
CAUTION
PLUGGING OUT USB DEVICE OR FORCED POWER-OFF DURING VERSION UPGRADE MAY CAUSE PERMANENT DAMAGE.
Group
 Please Click ( ) and the following screen will display.
 Click ( ) on the right-hand side of Group Name box or Group Name box. Then, the virtual keyboard will display.
 Please Click ( ) desired characters (up to 60 letters) on the virtual keyboard.
 Select access rights for the Group by checking  some of the following items (All, Setup, Archiving, Shutdown, Search,
Network, and Reboot). If Click (  ) ‘All’, all items are checked/unchecked at once.
 Please choose ‘OK’ to confirm the settings, choose ‘Cancel’ to cancel.
 To Edit the Group, Select a Group from the list and Click ( )
 To Delete the Group, Select a Group from the list and Click ( )
USER
 Please Click ( ) and the following screen will display.
 Click ( ) Drop-down list of Group Name to select a group
 Click ( ) on the right-hand side of User ID frame or User ID box then virtual keyboard will display.
 Please Click ( ) desired characteristics (up to 60 letters) on the virtual keyboard.
 Input Password, Confirm and E-mail.
 Please choose ‘OK’ to confirm the settings, choose ‘Cancel’ to cancel.
Account