KT&C KVR-1601S - Manual (Page 93)

93
NOTE
The Remote Device Event Log is on when the “pause” is shown while the log is stopped when the “resume” is
shown in the menu.
 Double click the detected “Alarm In” or “Motion” event in the remote device event log to check the video of the event.
 Click the “Refresh” button to refresh the data.
 Click the right mouse button on the registered device to on/off Event Log in the Server List.
 A user selects “Event Log Off”; all event logs will be unchecked on Remote Device Event Log panel.
6.5.4 CMS System Log
 This is the log menu where users can check the log information of the CMS program.
 Check “Visible” in the CMS System Log menu to see the menu or uncheck “Visible” in order not to see the menu.
 Click the “Update Log” button to update the log.
 User can classify the Manager and User by checking the ID and get the information of connect/disconnect and shutdown of the
user.
6.5.5 Health Check
 This is the menu where users can easily check the overall status of a device.