KT&C KVR-1601S - Manual (Page 180)

180
13.2.7.1 HD-SDI In/Out and HDMI In/Out Connections
 Connect an ‘HD-SDI OUT’ of HD-SDI device to ‘HD-SDI IN’ of HSC 1200 using by 75ohm coaxial cable.
 Connect an ‘HDMI OUT’ of HSC 1200 to ‘HDMI IN’ of device with HDMI output using by HDMI cable.
13.2.7.2 Power Supply Connections
 Plug the power supply adapter (DC 12V, 3.33A) which is included in this product to ’DC12V’ connector and plug another side
to power source and Input voltage is a free volt (100 VAC ~ 240 VAC).
13.2.8 Cable
 75 ohm coaxial cable
 HDMI cable
 VGA cable
NOTE
The cables above are not included in the package.
13.2.9 Operation Key and Screen Display Information
First Digit No. Output resolution
1 OUT_1024x768
2 OUT_1280x720p_60Hz
3 OUT_1920x1080_30Hz
4 OUT_1920x1080_60Hz, (default)
5 OUT_1920x1080_60Hz_RB
NOTE
Operation button: When operation button is pressed, output resolution is changed. Please refer the table above to identify
signal output resolution on each button pressing.
Second Digit No. Input resolution
- No input detected
1 IN_1280x720p (max. 60 frames)
2 IN_1920x1080i(50 or 60 field)
3 IN_1920x1080p(30 frame only, doesn’t support 60 frame)
NOTE
Input resolution depends on the input signal.
NOTE
Please note that HD-SDI Loop-out of this device has the same function as HD-SDI repeater that extends the signal
transmission distance up to 150m.
13.3 HSC2110
13.3.1 Introduction
 HSC 2110 is a video signal converter from SD (Analog video signal) to HD-SDI.
13.3.2 Features
 Convert 1CH SD to 1CH HD-SDI
 NTSC/PAL Input Signal Auto Detection
 Output Signal Format 1080p 30