KT&C KVR-1601S - Manual (Page 46)

46
 To adjust the location of the cameras for each sequence, Click ( ) each Drop-down list and able to select the channel.
 To adjust the rotation interval of cameras, Click ( ) each Drop-down list and select from 3, 5, 10, 15, 30 and 60 seconds.
If Click (  ) at the top Drop-down list in X1 Seq, Users can adjust all items of interval at once.
 To activate Sequence mode during live monitoring, click to select the multi-channel split display mode on Display Menu
Bar on the left margin of the main monitor.
NOTE
X8, X9, X10 Seq use only with 8/16 channel DVRs and x10 seq use only with 16 channel DVRs
 Spot or Multi Spot is only available in S, A, B, C, D, G (4CH) and J Type.
 This connection supports multi-channel display (1/4/8/9/10/16) on spot monitor depending on its channels (4/8/16).
 Please Click ( ) DEVICE>Display>Spot Monitor and the following screen will display.
 To Select the type of spot out, Click ( ) combo box (Users can select Multi spot or Spot).
 The Sequence menu allows a user to adjust channel sequencing interval of Spot Monitor.
- X1 Seq: Adjust interval for ‘Full screen sequencing’.
- X4 Seq: Adjust interval for ‘4 split screen sequencing’.
- X8 Seq: Adjust interval for ‘Quad screen sequencing’.
- X9 Seq: Adjust interval for ‘9 split screen sequencing’.
- X10 Seq: Adjust interval for ’10 split screen sequencing’.
 Check  check box next to the camera that wish to include in sequencing. Any camera with unchecked check box will be
excluded from channel sequencing.
 To adjust the location of the cameras during the sequence, Click ( ) each Drop-down list and able to select the channel.
 To adjust the rotation interval of cameras, Click ( ) each Drop-down list (Users can select 3, 5, 10, 15, 30 and 60 seconds).
If Click (  ) at the top Drop-down list in X1 Seq, Users can adjust all items of interval at once.
NOTE
X8, X9, X10 seq use only with 8/16 channel DVRs and x10 seq use only with 16 channel DVRs
Spot Monitor