KT&C KVR-1601S - Manual (Page 50)

50
 The Alarm In menu will allow users to give title and to select the type of Alarm input.
 Click ( ) the keyboard icon on the right-hand side of each box on name column or name column and the virtual keyboard will
display. Then, please register the title of Alarm input.
 When a check box is marked  on Use, a corresponding Alarm starts operating. However, if a user does not check the check
box, the operation stops. If Click (  ) ‘All’ of use box, all items are check/uncheck at once.
 Click ( ) each box on Type column to select type of a corresponding Alarm input. If Click ( ) ‘NC/NO’ of Type column, all
items can be changed NC/NO at once.
- NO: contact is normally open
- NC: contact is normally closed
 Please Click ( ) Alarm Out and the following screen will display.
 The Alarm Out menu will allow a user to give title and to select the type of Alarm output.
 Click ( ) the keyboard icon on the right-hand side of each box on name column or name column and the virtual keyboard will
display. Then, please register the title of Alarm output.
 When a check box is marked  on Use, a corresponding Alarm output starts operating. However, if a user does not check the
check box, the operation stops. If Click (  ) ‘All’ of use box, all items are check/uncheck at once.
 Click ( ) each box on Type column to select type of a corresponding Alarm output. If Click ( ) ‘NC/NO’ of Type column, all
items can be changed NC/NO at once.
- NO: contact is normally open
- NC: contact is normally closed
 Users may change duration of all Alarm output.
4.3.4 Storage
 Please Click ( ) DEVICE>STORAGE and the following screen will display.
Alarm In
Alarm Out