KT&C KVR-1601S - Manual (Page 58)

58
 Please Click ( ) Emergency and the following screen will display.
 The Emergency menu allows a user to set Emergency based recording rates and resolution, when ‘Emergency button pressed.
 Each box on Title column shows camera title registered in DEVICES>Camera. A user may not change camera titles here.
 Click ( ) each box on Resolution column to select recording resolution of a corresponding camera. A user may select one of
360x240(288), 720x240(288), 720x480(576), 960x480(576), 1280x720 and 1920x1080.
 Click ( ) each box on Frames column to select recording rate of a corresponding camera. Recording rate varies by selected
recording resolution.
 Please ( ) Pre-Event and the following will display.
 Pre-Event is effectively used when a user selects recording mode by Motion, Alarm or Emergency.
 Pre-Event feature allows a user to make a DVR to record at the same conditions as defined at Motion, Alarm, and Emergency
for a period of ‘up to’ actual event triggered time.
 Please follow the setup procedures below.
① Click (  ) Drop-down list of Duration box to select recording duration (10 second ~ 10 minutes)
② Click (  ) Drop-down list of “Record follows” to apply the same Recording Setting of Motion, Alarm or Emergency for a
period as defined above.
NOTE
Pre-Event recording conditions are dependent on Motion, Alarm or Emergency which is configured by the user.
Emergency
Pre-Event