KT&C KVR-1601S - Manual (Page 59)

59
4.4.2 Schedule
 Please Click ( ) RECORD>Schedule and the following will display.
 The Schedule table displays one week divided by hour and date. Each cell represents one hour. A user may choose
appropriate recording conditions by hour. Holidays could be defined by a user separately.
 Click ( ) Drop-down list of Camera box to select Camera.
 Please set the recording mode as follows:
① Mark a check box to select record mode in record mode table.
② Click block, row, column to register desired recording mode.
- Click (  ) a cell and only the cell will be registered.
- Click (  ) a row (SUN~HOL) and the entire row will be registered.
- Click (  ) a column (00~23) and the entire column will be registered.
③ Click (  ) Save button to save setting
 Click and hold mouse cursor on the Schedule table and then brush as you want. The brushed cells will be registered as your
record mode selection.
 Repeat the procedure for Camera No. 2 to 16. If a user wants all other cameras to have the same mode, please Click ( )
Save to all CH button.
 Please Click ( ) Schedule>Holiday and the following screen will display.
 The Holiday menu allows a user to register holidays. Please follow the registration procedure below.
① Use arrow buttons in the Month Calendar to select Year and Month of holiday to be registered.
- : Move to next ‘Year’
- : Move to previous ‘Year’
- : Move to next ‘Month’
- : Move to previous ‘Month’
Setting
Holiday