2 view format, 3 digital zoom, 4 freeze live image – KT&C KVR-1601S User Manual
Page 66
66
On the right bottom side of the screen, disk usage will show by %.
On the left top side of each channel screen
,
,
,
,
,
,
,
,
,
,
,
,
,
,
icon will show as its operation.
At the normal state, HDD Overwrite mode is on and
icon shows.
When Overwrite mode is off at DEVICE>STORAGE>Overwrite,
will show.
Click Emergency recording button,
icon will show.
Click Audio button,
icon will show. And Click Audio button again to reactivate the Audio.
NOTE
Note that the audio on/off is NOT for RECORDING. This button selection is for Audio out to DVR’s ‘Line/Speaker Out’.
5.1.2 View Format
The available view formats when the Main Monitor is in viewing mode include Full Screen (Single channel View), Split Screen,
Channel Sequencing Screen and PIP screen.
- Full Screen: Please press camera select key (1~16) to view the corresponding camera image in full view format.
NOTE
Using a mouse: Double Click to view the corresponding camera image in full view format and Double Click again to back to Split Screen.
- Split Screen: Please press DISPLAY key
and the available split screens (or multi-window view formats) will display
alternately (i.e., 1, 4, 8, 9, 10, 16).
- Channel Sequencing: Please press SEQUENCE key
to display images in sequencing view format periodically. This
automatic sequence function is not limited to the full screen format, but can be used in any view mode. In 8 channels DVR,
1 or 4-camera sequencing view mode is possible and in 16 channels DVR, 1, 4, 8, 9 or 10-camera sequencing view
modes are possible.
5.1.3 Digital Zoom
Select a Channel into Full Screen.
Drag a portion to zoom by mouse.
Double Click mouse to exit zoomed screen.
This function works only in the full screen. A user cannot use the digital zoom function in split screen format, channel
sequencing or PIP mode.
5.1.4 Freeze Live Image
Press FREEZE key
while viewing live image to pause the image.
The Freeze function works only in the full screen or split screen formats. Please do not use this function in channel sequencing
mode or in PIP mode.