KT&C KVR-1601S - Manual (Page 48)

48
CAUTION
IT IS NOT POSSIBLE TO CHANGE PORT NUMBER, WHEN A USER IS CONNECTED TO THE DVR VIA NETWORK.
ONCE PORT NUMBERS ARE CHANGED, IT MUST BE ALSO CHANGED THE PORT NUMBERS ON REMOTE SOFTWARE SUCH AS
CMS Pro, mViewer Pro, iCMS and xCMS.
Dual Streaming
 To change Frame rate and qualities of dual streaming for Live monitoring, uncheck from the checkbox next to Default Value.
- Frames : 1, 3, 5, 7, 15 frames for NTSC (1, 3, 5, 6, 12.5 frames for PAL)
- Qualities : Low, Standard, High, Super
NOTE
Default Frame rate and Quality are 15 and High .
NOTE
Dual Streaming mode reduces network traffic and then show display more smooth at the low speed network environment.
 Please Click ( ) DDNS and the following screen will display.
 DDNS (Dynamic Domain Name System) service registers its unique Domain name to a provided server and allows a user to
use the same address name to access the DVR. A user may use 3
rd
Party DDNS service if they have an account instead of
dvrdomain.com.
Dvrdomain.com
- Check  a checkbox of Dvrdomain.com to use dvrdomain.com.
- As for DDNS Server, Dvrdomain.com will be showing as default.
- Port number 95 will be shown as default. (It’s possible to use 80 alternatively)
- By pressing the ‘Get Domain Name’, the DVR activates DDNS services and brings a registered DDNS name. A user may
use this name as an IP address when they add a DVR on software.
DDNS