Luminex xPONENT 4.0 SP1 - Manual (Page 122)

Luminex xPONENT 4.O Software Manual
110
2. Click Import Kit at the bottom right side of the window. The Import Calibration or
Performance Kit dialog box opens.
3. Locate the xMAP calibrator or verification kit information file, and click Open.
Import CAL or VER Kits
1. Open the Maintenance page, then open the Lot Management tab.
2. Click Import Kit. The Import Calibration or Performance Kit dialog box opens.
3. Select the kit you wish to import, then click Open.
Export CAL or VER Kits
1. Open the Maintenance page, then open the Lot Management tab.
2. In the Active Reagents section, select the kit you want to export from the Calibration
Kit or Performance Verification Kit lists.
3. Click Export.
4. In the Export Calibrator or Verification Lot dialog box, select an export location for
the kit.
5. Type the kit name for the exported kit into the File Name box.
6. Click Save. The dialog box closes.
Delete CAL and VER Kit Information
1. Open the Maintenance page, then open the Lot Management tab.
2. In the Active Reagents section, select the kit you want to delete from the Calibration
Kit or Performance Verification Kit lists.
3. Click Delete Kit.
CAUTION: There is no confirmation dialog box when you delete a kit.
Create Calibration Reports
1. Open the Results page, then open the Reports tab.
2. In the Report list, click Calibration Summary.
3. In the Type list, click the calibrator or verifier for which you want to create a report.
4. In the Dates list, select a start date for the date range you want to view.
5. In the Through list, select the end date for the date range you want to view.
6. Click Generate to display the desired report.
7. Use the left or right Page arrows to navigate to the different report pages.
8. Click Print to print the report, or Save to save the report.
9. Click New Report to generate another report.
Managing Sample Lists
Use the Samples page to create a sample list, view or edit sample list details, or create a
batch.