Luminex xPONENT 4.0 SP1 - Manual (Page 24)

Luminex xPONENT 4.0 Software Manual
12
Home
The Home page displays a welcome message, batch creation buttons, Daily Activities
shortcuts, and the Installed Protocols list.
CAUTION: The sheath fluid and the solution in which beads are stored
contain proclin, which may cause an allergic reaction. Use
personal protective equipment, including gloves and safety
glasses.
FIGURE 4. Home Page
Return to the Home page at any time by clicking Home in the Navigation toolbar. This
page contains the following:
Click to Create a new Batch from a new Protocol. Creates a new batch from a new
protocol by opening the Settings tab of the Batches page. Users can create protocols on
the fly as a batch is created, and will have the option to save the protocol before or after
the batch is run. For more information, see “Create a New Batch From a New Protocol” on
page 24.
Click to Create a new Batch using the highlighted Protocol below. Creates a new
batch using a selected protocol from the Installed Protocols list. For more information
about creating a batch from an existing protocol, see “Create a New Batch from an
existing Protocol” on page 18.