Luminex xPONENT 4.0 SP1 - Manual (Page 131)

119
Using the Software
View and Print Reports
The Luminex xPONENT software can format your batch or multi-batch results in a variety
of export formats and provide different types of information in different types of reports.
Three types of reports are available. See “Reports Tab” on page 52 for a description of
available reports.
NOTE: Install the printer before initiating the Print command.
1. Open the Results page, then open the Reports tab.
2. In the Report list, click the report you want to view.
3. In the Type list, select the report type you want to view.
4. Select the item for which you want to generate the report. If you are creating a batch
report, select the analyte to include in the report.
5. Click Generate. The report displays in the lower part of the Reports tab.
6. Click Print to print the report, or Save to save the report as a .pdf file.
Transmit a Batch
You can only perform this task if you are using an xPONENT package licensed for LIS.
1. Open the Results page, then open the LIS Results tab.
2. Select a batch, then click Open.
3. Click Yes to approve and transmit the batch to the LIS database.
Using Protocols, Lots, and Kits
Protocols
There are four protocol types:
• Qualitative Assay (Standards or Controls)
• Quantitative Assay (Standards or Controls)
• Allele Call
• None
You can also create a protocol that does not use an analysis setting.
You can create each Quantitative, Qualitative, or Allele Call protocol using one product
that is composed of a definable number of standards and controls.
WARNING: Human and animal samples may contain biohazardous infectious
agents. Where exposure (including aerosol) to potentially
biohazardous material exists, follow appropriate biosafety
procedures and use personal protective equipment, such as
gloves, gowns, laboratory coats, face shields, or mask and eye
protection, and ventilation devices. Observe all local, state, and
federal biohazard handling regulations when disposing of
biohazardous waste material.