Luminex xPONENT 4.0 SP1 - Manual (Page 66)

Luminex xPONENT 4.0 Software Manual
54
• Print - Click to print the analyte information currently being viewed.
• New Report - Click to return to the main Reports window.
NOTE: If running a data interpretation of an allele call batch report, be
aware that when choosing analytes from the Select Analytes list,
selecting one analyte will select all analytes in that group.
• Protocol Reports - A list of protocols displays. Choose from the following reports:
• Protocol Settings
• Plate Layout
• Protocol Audit
Select a protocol and then click Generate to generate the report.
• Calibration and Verification Reports- Displays a list of calibrations and verifications.
Choose from the following selections:
• All
• F3DCAL1
• F3DeCAL1
• F3DCAL2
• F3DCAL3
• F3DVER1
• F3DeVER1
• F3DVER2
Select a calibration component, a date from the Date list, and click Generate to generate
the report.
• Performance Verification Reports - Displays two report types. Choose either of the
following:
• Condensed
• Detailed
Select a report type, a date range from the Date list, and click Generate to generate the
report.
• System Log Reports - Displays a list of system log reports. Choose from the following
selections:
• All
• Maintenance
• Security
• Warning and Errors
Select a system log report, a date from the Date list, and click Generate to generate the
report.
• Advanced Reports - Enables a single option, User Report, in the list.
Click Generate to generate the report.