Luminex xPONENT 4.0 SP1 - Manual (Page 45)

33
Touring the Software
Create a New MultiBatch
Use this button to add or remove pending batches to the multi-batch set up and to run a
multi-batch. A multi-batch is composed of one or more pending batches which, together,
will fit on one plate. Use the multi-batch feature to conserve plates.
NOTE: You cannot add a batch that forces multiple plates to a multi-batch
operation. When creating or adding batches, ensure your batches
fit on one plate. All batches must use the same plate name
previously defined and adjusted.
FIGURE 19. New Multibatch Tab