IntelliTrack Inventory Shipping Receiving Picking (ISRP) - Manual (Page 115)

Chapter 7
CE Client Settings
103
Important: To avoid duplication of inventory adjustments (such as picks,
receives, moves, inventory counts, etc.), the collected data should be
purged after uploading the data to the PC and processing the upload.
To purge collected data manually, tap Purge > Collected Data from the
menu bar found along the bottom of the Main screen.
A message box appears, asking you if you want to proceed with purging all
collected data on the handheld.
Tap the Yes button to close the message box and purge all the collected
data on the handheld. Tap the No button to close the message box and can-
cel purging all the collected data on the handheld.
Syncing Data
Data from the CE Client application to the workstation application is trans-
ferred during a “data sync” operation. To transfer all collected data, con-
nect the handheld device and the desktop computer (by using a cradle,
cable, or infrared connection) and then perform a “data sync” from the
handheld application via the Sync menu option.