Auto pick function, Adding a new picking order – IntelliTrack Inventory Shipping Receiving Picking (ISRP) User Manual
Page 151
Chapter 10
Picking/Shipping
139
Auto Pick Function
Note: When picking an order, the site, location, and item number are
always required fields. Additional fields, such as unit of measure, serial
number, lot, and expiration date are only required if they were enabled
during the setup process. If these fields are not enabled, they are not dis-
played.
Use the Auto Pick function to:
•
Pick an order with no existing picking order in the system (auto pick).
For example, goods without a picking order may be processed by auto
picking them.
Or, goods may be picked to the picking location. As the process contin-
ues, the order is built and inventory is increased.
Once the operator exits the order, it may be closed to prevent further
activity for the order.
•
Change the order detail.
Adding a New
Picking Order
To pick an order that is not yet in the system (auto pick) with the CE Client
application on the handheld device, please refer to the instructions that fol-
low.
1.
From the Main screen, select the Pick/Ship button.
2.
The Pick/Ship menu appears. Select AutoPick.