IntelliTrack Inventory Shipping Receiving Picking (ISRP) - Manual (Page 127)

Chapter 8
Managing Inventory
115
Inventory Counts
A main feature of ISRP is the physical and cycle counting of inventory.
When you use this feature, you are able to track the last time a physical or
cycle count was performed for a location or item. (When configured for
inventory cycle counting, the workstation application will keep track of
when it is time to perform the next physical and/or cycle counting of
inventory via the Batch Cycle Count Report.)
Note: Inventory data validation in the CE Client application depends
upon the data parameters set for sending inventory data in the Batch Por-
table Utility, Send Portable Data form. Please refer to
“Validation Data Set-
tings in the Batch Portable Utility” on page 68 and “Downloaded Data in the
CE Client Application” on page 77 for more information about inventory
data validation in the CE Client application.
Physical
Inventory
Counting with
the Handheld
Device To record physical inventory counts with the CE Client application, please
refer to the instructions below:
1. In the CE Client application, tap the Inventory button found in the
Main screen. The Inventory menu appears. Next, select Physical
Inventory.
2. The Inventory screen appears.