IntelliTrack Inventory Shipping Receiving Picking (ISRP) - Manual (Page 154)

I NTELLI T RACK ISRP CE C LIENT V 8.1
CE Client Guide
142
(The actual quantity represents the prior pick quantity in a picking
order.)
9. If you have enabled the auto line numbering feature, the line number
will be automatically entered in the Line # field. If you have not
enabled the auto line numbering feature, enter the line number in the
Line # field.
10. Next, tap the Location tab to bring this portion of the screen to the
front.
11. Tap the drop-down arrow in the Location field and select the site loca-
tion where the pick order item(s) are stored in the Location field. (If
you did not mark the Show Pull Down Lists check box in the CE Cli-
ent Setup screen, the Location field will not contain a drop-down
arrow or a selection list. You must scan or enter the data into the field.)
(Location selection is limited to the downloaded location list. This
means that you cannot add a new location in this field.)
12. If you are using multiple units of measure tap the drop-down arrow in
the field next to the quantity and select the desired unit of measure from
the list that appears. (If you did not mark the Show Pull Down Lists
check box in the CE Client Setup screen, the field will not contain a
drop-down arrow or a selection list. You must scan or enter the data
into the field.) (The Unit of Measure selections are limited to the down-
loaded list.)
13. Next, enter the total item quantity of this pick order in the Qty field.
(This amount may be higher then the on hand quantity of the item if
you are placing the pick order against an anticipated receiving order.)
14. If you are using serial numbers, and have not downloaded item data,
the system assumes all items are serialized. This means that you must
enter a unique serial number for each item that is being picked in the
Serial No. field. If you downloaded item data and the item is serialized,
you must enter a unique serial number for each item that is being
picked in the Serial No. field. If you downloaded item data and the