IntelliTrack Inventory Shipping Receiving Picking (ISRP) - Manual (Page 16)

I NTELLI T RACK ISRP CE C LIENT V 8.1
CE Client Guide
4
Disabling User Account Control in Windows 7
In Windows 7, User Account Control (UAC) is disabled at the User
Account Control Settings dialog. To reach this dialog, go to the Start menu
and enter UAC or go to the Control Panel’s Search box and enter UAC. At
the User Account Control Settings dialog, move the slider to the Never
Notify position.
Disabling User Account Control in Windows Vista/
Windows Server 2008
In Windows Vista, UAC is disabled from the Control Panel. Go to the Con-
trol Panel and enter “UAC” into the Search box; a link to turn off user
account control appears. Click the link “Turn User Account Control
(UAC) on or off.” A screen appears that contains the UAC setting; at the
Turn on User Account Control screen, unmark the Use User Account
Control (UAC) to help protect your computer check box. After you dis-
able this setting by making sure the check box is not marked, you must
restart your computer for the change to go into effect.
Required IIS
Settings for
Windows
Vista and
Windows 7 Important:These requirements pertain to Windows Vista/Windows 7 oper-
ating systems. The required settings are listed in this section. If you are not
using Windows Vista/Windows7/IIS v7.0, this section DOES NOT APPLY
to you.
Internet Information Services (IIS) version 7 is included with Windows
Vista/Windows 7. However, you must turn Internet Information Services
(IIS) on before you can use it. Additionally, you must turn on specific web
management tools and world wide web settings for Remote Data Access
(RDA), which ISRP uses for workstation application and batch portable
application database communication. You must turn on IIS and enable the
required features BEFORE installing IntelliTrack ISRP and the CE Client
component. To turn IIS on and enable the required features for the CE Cli-
ent application, please refer to the instructions that follow:
“Enabling IIS”
on page 4 ; “Turning on the IIS Web Management Tools” on page 5 ; and
“Turning on the IIS World Wide Web Services” on page 5 .
Enabling IIS
To turn on ISS, please refer to the instructions that follow.