IntelliTrack Stockroom Inventory - Manual (Page 136)

I NTELLI T RACK S TOCKROOM V 7.0
User Manual
108
UOM in the Measure field of the Item Data form. To assign the unit of
measure to the selected item:
1. In the Item Data form, click the drop-down arrow in the Measure field
and select the UOM from the list that appears; or enter the UOM in the
Measure field.
2. Enter the Unit of Measure conversion in the Conversion field.
For example, if you select Each as the Unit of Measure in the Measure
field, enter 1 in the Conversion field. Or, if you select “Box” as the
Unit of Measure in the Measure field, and a box of this item contains
10 units, enter 10 in the Conversion field.
3. Enter the cost per unit of the item in the Unit Cost field.
Storing
Reorder
Quantity
Ranges You are able to set a reorder quantity, a minimum quantity, and a maximum
quantity for an item. This ensures that when you run a Reorder Report, the
system will be able to track when you need to reorder the item. The mini-
mum, maximum, and reorder quantities for an item are stored in the Item
Data form.
To enter or edit minimum quantity, maximum quantity, and reorder quan-
tity, refer to the instructions that follow.
1. In the Item Data form, select an item.
2289.book Page 108 Thursday, July 9, 2009 2:35 PM