IntelliTrack Stockroom Inventory - Manual (Page 206)

I NTELLI T RACK S TOCKROOM V 7.0
User Manual
178
10. Click the Preview button in the Sequential Barcode form to preview
the sequential bar codes.
11. Click the Print button in the Sequential Barcode form to print the
sequential bar codes in the label printing software application.
12. The label printing software opens; the Print window appears. Click the
Print button in the label printing software Print window to print your
sequential labels from the label printing software.
Note: IntelliTrack, Inc. supports Zebra label printers. The preformatted
labels contained in the Stockroom application are designed to use a Zebra
label printer.
13. Click the Print button to print the selected label from the selected
printer. The label is sent to the printer and the Print window closes. You
are returned to the label. If you are finished with this label in the label
printing software, close the label and then close the label printing soft-
ware. You are returned to the Bar Code Labels form in the Stockroom
application.
Printing Custom Labels
For full label design capability (i.e., the ability to create and edit labels),
the Stockroom application integrates with the NiceLabel application; how-
ever, NiceLabel must be purchased separately. Contact IntelliTrack Sales
at
[email protected] for more information.
To preview and print custom labels, please refer to the instructions that fol-
low.
1. Select Reports Command Tab > Barcode Command Set > Barcode
Command Selection from the command tab bar.
2289.book Page 178 Thursday, July 9, 2009 2:35 PM