IntelliTrack Stockroom Inventory - Manual (Page 246)

I NTELLI T RACK S TOCKROOM V 7.0
User Manual
218
Configuring the ITI Registration Application
Pool
This section applies to the Windows Vista Operating System or the Win-
dows Server 2008 Operating System. If you are using the Windows XP
operating system, this section does not apply to you.
If you are using the Windows Vista or Windows Server 2008 operating
system, you must configure the ITIRegistration Application Pool in IIS
Manager in order to upload data to the workstation application.
Warning: If you are using the Windows Vista or Windows Server 2008
operating system, you MUST CONFIGURE the ITIRegistration Pool in
your IIS Manager in order to upload portable data to the workstation
application. If you do not configure the ITIRegistration Pool, you will
receive an error when you try to upload data from the handheld device to
the workstation application.
Note: You must register your software in order to upload portable device
data to the workstation application. The batch portable application will
not fully transfer data to the workstation application while running in
demo mode.
The ITIRegistration application pool is configured in IIS Manager. To con-
figure the ITIRegistration Application Pool, please refer to the instructions
that follow.
1. Go to Control Panel > Administrative Tools and open Internet
Information Services (IIS) Manager.
2. In the left pane, select the Sites folder > Default Web Site folder >
ITIRegistration.
2289.book Page 218 Thursday, July 9, 2009 2:35 PM