IntelliTrack Stockroom Inventory - Manual (Page 237)

Chapter 12
CE Batch Setup
209
Reaching the Batch Synchronization Utility
Note: The Batch Synchronization Utility is reached through the worksta-
tion application. Please refer to your Quick Start Guide for information
about installing the workstation application.
After the workstation installation is complete, you may access the DMS
Batch Synchronization Utility through the workstation application.
1. Click Start > Programs > IntelliTrack > DMS > Stockroom > Stock-
room workstation. The application opens.
2. Enter your user name in the User ID field and your password (if appli-
cable) in the Password field and then click the OK button. The dash-
board appears.
3. From the menu bar, select Portable Command Tab > Synchronize CE
Device Command Set > Synchronize CE Device Selection. The DMS
Batch Synchronization Portable Utility appears.
2289.book Page 209 Thursday, July 9, 2009 2:35 PM