ZOLL AutoPulse 100 - Manual (Page 38)

Page 2-14 P/N 12555-001 Rev 3
User Guide
Figure 2-15 Mute Duration Menu
The “Set Mute Duration” menu item allows you to set the length of time that the audio tone mute will be
sustained when it is activated by pressing the Tone Mute Button, or to disable the button’s function
altogether. The time options are to set the mute to last for “30 seconds”, “60 seconds” (one minute) or
“120 seconds” (two minutes). Highlight the desired setting using the Move Up and Down arrow buttons,
press the Select Choice Button to select it (a check will appear beside the selected item) and then press
the gray Menu/Mode switch button under the word “back” to return to the main Administrative Menu.
If the pause alert tone is disabled here it cannot be re-enabled, during operation, by using the Tone Mute
Button (refer to Section 1.4.2.6, “Tone Mute Button,” on page 1-7).
3 0 s e c o n d s
6 0 s e c o n d s
1 2 0 s e c o n d s
D i s a b l e d
M U T E D U R AT I O N
3 0 : 2
b a c k