Appendix a autopulse daily checklist – ZOLL AutoPulse 100 User Manual
Page 75
Advertising
P/N 12555-001 Rev 3
Page A-1
User Guide
Appendix A
AutoPulse Daily Checklist
Date
Battery Serial Numbers
AutoPulse
Self Test
Performed
AutoPulse
Spare
Perform AutoPulse Self Test - Install a LifeBand and power on the AutoPulse. On Power up, all LEDs on the display will momentarily light up,
then only the Green POWER LED will remain lit. The Battery Charge Status Icon on the AutoPulse User Control Panel should also be visible with
4 bars, if not replace Battery with a fully charged Battery from the Multi-Chemistry Battery Charger. If the AutoPulse Platform red ALERT LED
remains on, refer to the Chapter 5, “Troubleshooting Procedures” in the AutoPulse User Guide. If the RED LED can not be resolved, contact ZOLL.
Advertising