ZOLL AutoPulse 100 User Manual
Page 50
Advertising
Page 3-10
P/N 12555-001 Rev 3
User Guide
Figure 3-10 Verifying Patient Alignment Display Panel Screen
4.
After the 3 second verify patient alignment pause is complete, compressions will automatically
begin. You may press the Start/Continue button to immediately initiate compressions ahead of that
time.
Warning:
•
Do not lean on the patient after pressing the Start/Continue button.
•
If you must move or realign the patient, you must press the Stop/Cancel button before
adjustment.
•
Do not place your hands or any other objects on or under the LifeBand while the AutoPulse
is analyzing the patient or during active operation.
3 0 : 2
S T O P
START
C h e c k p a t i e n t a l i g n m e n t .
Advertising