ZOLL AutoPulse 100 - Manual (Page 42)

Page 3-2 P/N 12555-001 Rev 3
User Guide
1. Power up the AutoPulse. The ON/OFF button is located on the top (“head”) edge of the AutoPulse
Platform (see Figure 3-1).
Figure 3-1 ON/OFF Button Location
2. The AutoPulse illuminates the green Power light-emitting diode (LED) on the User Control Panel
and performs its self-tests (see Figure 3-2). Refer to the User Control Panel and its display panel
during the operation of the AutoPulse. All operating information is available on the User Control
Panel.
Note: Make sure that no User Advisory, Fault or System Error messages display.
Figure 3-2 Self-Test Display Panel Screen
ON/OFF button
User Control Panel
3 0 : 2
I n i t i a l i z i n g . . .