Yokogawa AXFA14G/C User Manual

Page 27

Advertising
background image

IM 01E20C02-01E

5-7

5. BASIC OPERATING PROCEDURES

5.3.2

Setting Example for Numeric-Type Data: Flow rate span

This example describes the setting of the flow rate span for the numeric-type parameter
B23: Flow Span from 100 l/min to 120 l/min.

Setting Mode Condition

Touch the

switch to access B: Easy Setup.

NOTE

The

᭡ and ᭢ symbols to the left of the param-

eters indicate that additional setting items to
those being currently displayed may also be
selected. Use the

switch to cycle through

these items.

Sub-Item Parameter Search Mode has been accessed
in this screen.

Touch the

switch to move the cursor to

B23: Flow Span.

The cursor has been moved to B23: Flow Span in
this screen. (Sub-item selection screen (B))

Touch the

switch to access Parameter

Replacement Mode.

Once Parameter Replacement Mode has been
selected, the digit that can be replaced will be flashed
on and off. When in this condition, confirm the
relevant setting range as displayed at the bottom of
the screen and then set the parameter as required.

In this example, the parameter will be set to “120 l/min”.

NOTE

When setting a new value, use the
switch to move from digit to digit, and use the

switch to cycle through values for each

individual digit. In addition to digit, it is also
possible to select a decimal point, and this
allows the position of the decimal point to be
changed.

Modify the value to “120 l/min” as follows:

Touch the

switch to move the cursor to the

position for multiples of 10. Then, touch the

switch to change the value at this position from “0” to
“2”.

When the value of “120” has been setup, touch the

switch.

Start:

Major Item

Parameter

Search Mode

F0505-1.EPS

Setting mode

X4

Major item

parameter

Major item

Sub-item

parameter

Major item

Sub-item

selection (B)

X4

X2

Parameter

Replacement Mode

Sub-item

Parameter

Search Mode

Setting Mode

P:Protect

B:Easy Setup

C:Basic Setup

B:Easy Setup

50:Auto Zero Exe

10:Language

20:Flow Damping

B:Easy Setup

22:Base Time Unit

23:Flow Span

24:Flow Decimal Pnt

Selection of the appropriate parameter

B23:Flow Span
100 l/min
000100. l/min
Rng:0.00001 32000

B23:Flow Span
100 l/min
0000100. l/min
Rng:0.00001

32000

Advertising
This manual is related to the following products: