Yokogawa Touch Screen GP20 - Manual (Page 25)

2-11
IM 04L51B01-17EN
Commands and Responses
1
2
App
• If p2=Off, you cannot set p3.
• There is a limit to the number of recording channels
depending on the recording interval ( SDispData
command).
Recording
Interval
Number of Recording Channels
5 s/div 100
10 s/div 200
15 s/div or higher 500
• You cannot set a channel more than once.
SRecEvent
Channel for Recording Event Data
Sets the channel for recording event data.
Syntax SRecEvent,p1,p2,p3,p4
p1 Scan group (1)
p2 Number (see “Description”)
p3 Channel type
Off Do not record event data.
IO I/O channel
Math Math channel
Com Communication channel
p4 Channel number
Query SRecEvent[,p1[,p2]]?
Example Assign the event data of I/O channel 0006 to
number 11 and record.
SEventData,1,11,IO,0006
Description
• You cannot use this command to configure settings
while recording is in progress.
• You cannot use this command to configure settings
while computation is in progress.
• If p3=Off, you cannot set p4.
• This setting is valid when event data recording is
enabled (recording mode of the SMemory command).
• There is a limit to the number of recording channels
depending on the recording interval ( SEventData
command).
Recording
Interval
Number of Recording Channels
100 ms 100
200 ms 200
500 ms or more 500
• You cannot set a channel more than once.
SRecManual
Channel for Recording Manual Sampled
Data
Sets the channel for recording manual sampled data.
Syntax SRecManual,p1,p2,p3
p1 Number (1 to 50)
p2 Channel type
Off Do not record manual sampled data.
IO I/O channel
Math Math channel
Com Communication channel
p3 Channel number
Query SRecManual[,p1]?
Example Assign the manual sampled data of I/O
channel 0003 to number 2 and record.
SRecManual,2,IO,0003
Description
• You cannot use this command to configure settings
while recording is in progress.
• You cannot use this command to configure settings
while computation is in progress.
• If p2=Off, you cannot set p3.
• You cannot set a channel more than once.
SBatch
Batch Function
Configures the batch function’s basic settings.
Syntax SBatch,p1,p2,p3
p1 Enable or disable (Off, On)
p2 Number of lot number digits (Off, 4, 6, 8)
Off Do not use lot numbers.
4 4-digit lot number
6 6-digit lot number
8 8-digit lot number
p3 Auto increment (Off, On)
Query SBatch?
Example Enable the batch function. Use 4-digit lot
numbers. Automatically increment the lot
number in the next operation.
SBatch,On,4,On
Description
• You cannot use this command to configure settings
while recording is in progress.
STextField
Batch Text
Sets a batch text.
Syntax STextField,p1,p2,p3
p1 Field number (1 to 24)
p2 Title (up to 20 characters, UTF-8)
p3 Character string (up to 30 characters,
UTF-8)
Query STextField[,p1]?
Example For field number 3, set the field title to
“OPERATOR” and the character string to
“RECORDER1.”
STextField,3,’OPERATOR’,’RECORD
ER1’
Description
• You cannot use this command to configure settings
while recording is in progress.
SDirectory
Name of Directory to Save Data
Sets the name of the directory to save data.
Syntax SDirectory,p1
p1 Directory name (up to 20 characters,
ASCII)
2.4 Setting Commands