Yokogawa Touch Screen GP20 - Manual (Page 91)

2-77
IM 04L51B01-17EN
Commands and Responses
1
2
App
2.10.23 System Configuration (FSysConf)
The output in response to the command “FSysConf” is shown below.
Syntax
EA<crlf>
Unit:00
00:cccccccccccccccc_uuuuuuuuuuuuuuuu_defghijklmnopqrs<crlf>
01:cccccccccccccccc_uuuuuuuuuuuuuuuu_defghijklmnopqrs<crlf>
02:cccccccccccccccc_uuuuuuuuuuuuuuuu_defghijklmnopqrs<crlf>
03:cccccccccccccccc_uuuuuuuuuuuuuuuu_defghijklmnopqrs<crlf>
04:cccccccccccccccc_uuuuuuuuuuuuuuuu_defghijklmnopqrs<crlf>
05:cccccccccccccccc_uuuuuuuuuuuuuuuu_defghijklmnopqrs<crlf>
06:cccccccccccccccc_uuuuuuuuuuuuuuuu_defghijklmnopqrs<crlf>
07:cccccccccccccccc_uuuuuuuuuuuuuuuu_defghijklmnopqrs<crlf>
08:cccccccccccccccc_uuuuuuuuuuuuuuuu_defghijklmnopqrs<crlf>
09:cccccccccccccccc_uuuuuuuuuuuuuuuu_defghijklmnopqrs<crlf>
EN<crlf>
cccccccccccccccc Module models that are actually installed
-------------------- Module not installed (16 hyphens)
GX90XA-10-U2 Analog input module
GX90XD-16-11 Digital input module
GX90YD-06-11 Digital output module
uuuuuuuuuuuuuuuu Module models recognized by the GX
-------------------- Module not installed (16 hyphens)
GX90XA-10-U2 Analog input module
GX90XD-16-11 Digital input module
GX90YD-06-11 Digital output module
defghijklmnopqrs Module status
- Normal
X Error
d to s express the following items.
d System data error
e Calibration value error
f Parameter error
g Reserved (-)
h FRAM error
i Reserved (-)
j Reserved (-)
k Reserved (-)
l A/D error
m RJC error
n Reserved (-)
o Reserved (-)
p Reserved (-)
q Reserved (-)
r Reserved (-)
s Reserved (-)
2.10 ASCII Output Format