Yokogawa Touch Screen GP20 - Manual (Page 48)

2-34
IM 04L51B01-17EN
• You cannot use this command to configure settings
while computation is in progress.
SFailSts
Instrument Status to Output (/FL)
Sets the instrument status to output from the fail relay (DO
channel).
Syntax SFailSts,p1,p2,p3,p4,p5
p1 Memory/media status (Off, On)
p2 Measurement error (Off, On)
p3 Communication error (Off, On)
P4 Recording stop (Off, On)
p5 Alarm (Off, On)
Query SFailSts?
Example Output all information.
SFailSts,On,On,On,On,On
Description
• You cannot use this command to configure settings
while recording is in progress.
• You cannot use this command to configure settings
while computation is in progress.
SPrinter
Printer
Sets the printer.
Syntax SPrinter,p1,p2,p3,p4,p5,p6
p1 IP address (0. 0. 0. 0 to 255. 255. 255.
255)
p2 Paper size (A4, A3, Letter)
p3 Paper orientation (Horizontal, Vertical)
P4 Resolution [dpi] (300, 600)
p5 Number of copies (1 to 10)
p6 Snapshot (Off, On)
Query SPrinter?
Example Set the IP address to “192.168.111.24,” the
paper size to A3, the paper orientation to
horizontal, the resolution to 600, the number of
copies to 2, and snapshot to On.
Sprinter,192.168.111.24,A3,Horizon
tal,600,2,On
SLed
LED Indicator Operation
Sets the operation of the LED indicators on the front
panel.
Syntax SLed,p,p2
p1 Type (Function)
p2 Operation
Off Power state
AlarmAll Alarm
Query SLed?
Example Set the LED indicator operation to “Alarm.”
SLed,Function,AlarmAll
SSound
Sound
Sets touch and warning sounds.
Syntax SSound,p1,p2
p1 Touch sound (Off, On)
p2 Warning sound (Off, On)
Query SSound?
Example Enable touch and warning sounds.
SSound,On,On
SInstruTag
Instruments Tag
Sets tags.
Syntax SInstruTag,p1,p2
p1 Tag (up to 32 characters, UTF-8)
p2 Tag number (up to 16 characters, ASCII)
Query SInstruTag?
Example Set the tag to assign to the GX/GP to “GX” and
the tag number to “12345.”
SinstruTag,’GX’,’12345’
SConfCmt
Setting File Comment
Sets the setting file comment.
Syntax SConfCmt,p1
p1 Setting file comment (up to 50 characters,
UTF-8)
Query SConfCmt?
Example Set “SETTING FILE COMMENT.”
SConfCmt,’SETTING FILE COMMENT’
SUsbInput
USB Input Device
Specifies the USB input device.
Syntax SUsbInput,p1
p1 USB input device type
Japanese_109 Japanese keyboard
English_104 English keyboard
Query SUsbInput?
Example Specify the English keyboard.
SUsbInput,English_104
SSwitch
Internal Switch Operation
Sets the internal switch operation.
Syntax SSwitch,p1,p2,p3
p1 Internal switch number (1 to 100)
2.4 Setting Commands