Yokogawa Touch Screen GP20 - Manual (Page 51)

2-37
IM 04L51B01-17EN
Commands and Responses
1
2
App
Description
• The settings specified with this command takes
effect with the OIPApply command. The GX/GP IP
address does not change until you send the OIPApply
command.
SFtpKind
File to Transfer via FTP
Sets the file to transfer via FTP.
Syntax SFtpKind,p1,p2
p1 Setting type
Data Automatically transfer
display and event data
files when files are
generated.
Report Automatically transfer
report data files when
files are generated.
Snapshot Automatically transfer
snapshot data files when
files are generated.
AlarmSummary Transfer alarm
summaries
ManualSample Automatically transfer
manual sampled data
f i l e s w h e n m a n u a l
sampling is executed.
p2 Enable or disable transfer (Off, On)
Query SFtpKind[p1]?
Example Automatically transfer display and event data
files.
SFtpKind,Data,On
Description
• The report function is an option (/MT).
SFtpTime
FTP Transfer Time Shift
Sets the amount of time to shift file transfers that are
carried out by the FTP client function.
Syntax SFtpTime,p1,p2
p1 Setting type
Data Display and event data files
Report Report files
p2 Transfer shift time [minutes] (0 to 120)
Query SFtpTime[p1]?
Example Shift (delay) FTP transfers of report data files
by 30 minutes.
SFtpTime,Report,30
Description
• The report function is an option (/MT).
SFtpCnct
FTP Client Connection Destination
Server
Sets the FTP client connection destination server
Syntax SFtpCnct,p1,p2,p3,p4,p5,p6,p7
p1 Server
Primary Primary
Secondary Secondary
p2 Server name (up to 64 characters, ASCII)
p3 Port number (1 to 65535)
P4 User name (up to 32 characters, ASCII)
p5 Password (up to 32 characters, ASCII)
p6 Directory name (up to 64 characters,
ASCII)
p7 PASV mode (Off, On)
Query SFtpCnct[p1]?
The password is displayed using asterisks.
Example For the primary server, assign the name
“server1” and port number 21. Set the user
name to “Administrator1,” the password to
“password1,” and the directory to “directory1.”
Set PASV mode to Off.
SFtpCnct,Primary,’server1’,21,’Adm
inistrator1’,’password1’,’director
y1’,Off
SSmtpLogin
SMTP User Authentication
Sets the SMTP user authentication method.
Syntax SSmtpLogin,p1
p1 User authentication type
Off Not use authentication.
Auth-Smtp Use Authentication SMTP.
POP3 Use POP Before SMTP
(unencrypted).
APOP Use POP Before SMTP
(encrypted).
Query SSmtpLogin?
Example Do not use authentication.
SSmtpLogin,Off
SSmtpCnct
SMTP Client Connection Destination
Server
Sets the SMTP client connection destination server
Syntax SSmtpCnct,p1,p2,p3,p4,p5
p1 Destination server type (SMTP, POP)
p2 Server name (up to 64 characters, ASCII)
p3 Port number (1 to 65535)
P4 User name (up to 32 characters, ASCII)
p5 Password (up to 32 characters, ASCII)
Query SSmtpCnct[p1]?
The password is displayed using asterisks.
Example Connect to SMTP server “SMTPserver1.”
Set the port number to 25, the user name
to “administrator1,” and the password to
“password1.”
SSmtpLogin,SMTP,’SMTPserver1’,25,’
administrator1’,’password1’
SMailHead
2.4 Setting Commands