Yokogawa Touch Screen GP20 - Manual (Page 3)

i
IM 04L51B01-17EN
Introduction
Thank you for purchasing the SMARTDAC+ GX10/GX20/GP10/GP20 (hereafter referred to
as the GX and GP) Series.
This manual explains the dedicated commands for the GX/GP. To ensure correct use, please
read this manual thoroughly before beginning operation.
Notes
• The contents of this manual are subject to change without prior notice as a result of
continuing improvements to the instrument’s performance and functions.
• Every effort has been made in the preparation of this manual to ensure the accuracy of its
contents. However, should you have any questions or find any errors, please contact your
nearest YOKOGAWA dealer.
• Copying or reproducing all or any part of the contents of this manual without the
permission of YOKOGAWA is strictly prohibited.
• The TCP/IP software of this product and the documents concerning it have been
developed/created by YOKOGAWA based on the BSD Networking Software, Release 1
that has been licensed from the Regents of the University of California.
Trademarks
• vigilantplant is a registered trademark of Yokogawa Electric Corporation.
• SMARTDAC+ is a trademark of Yokogawa Electric Corporation.
• Microsoft and Windows are registered trademarks or trademarks of Microsoft Corporation
in the United States and/or other countries.
• Adobe and Acrobat are registered trademarks or trademarks of Adobe Systems
Incorporated.
• Company and product names that appear in this manual are registered trademarks or
trademarks of their respective holders.
• The company and product names used in this manual are not accompanied by the
registered trademark or trademark symbols (® and ™).
Revisions
December 2012 1st Edition
February 2013 2nd Edition
May 2013 3rd Edition
3rd Edition: May 2013 (YK)
All Right Reserved, Copyright © 2012 - 2013, Yokogawa Electric Corporation