Yokogawa Touch Screen GP20 - Manual (Page 41)

2-27
IM 04L51B01-17EN
Commands and Responses
1
2
App
Example Set timer number 2 to relative timer at 6 hours
30 minutes. Reset the timer when computation
starts.
STimer,2,Relative,0,6,30,On
Description
• You cannot use this command to configure settings
while recording is in progress.
• You cannot use this command to configure settings
while computation is in progress.
• If p2=Off, you cannot set p3 or subsequent
parameters.
• If p2=Relative and p3=0, you cannot set “00:00” (for
p4 and p5).
SMatchTimer
Match Time Timer
Sets a match time timer.
Do Not Use Match Time Timers
Syntax SMatchTimer,p1,p2
p1 Match time timer number (1 to 4)
p2 Type (Off)
Match Time Timer That Synchronizes Once a Year
Syntax SMatchTimer,p1,p2,p3,p4,p5,p6,p7
p1 Match time timer number (1 to 4)
p2 Type (Year)
p3 Start time: Month (Jan, Feb, Mar, Apr, May,
Jun, Jul, Aug, Sep, Oct, Nov, Dec)
P4 Start time: Day (1 to 31, depends on the
month)
p5 Interval: Hours (HH) (00 to 23)
p6 Interval: Minutes (MM) (00 to 59)
p7 Timer action
Single Single shot
Repeat Repeat
Match Time Timer That Synchronizes Once a Month
Syntax SMatchTimer,p1,p2,p3,p4,p5,p6
p1 Match time timer number (1 to 4)
p2 Type (Month)
p3 Start time: Day (1 to 28)
P4 Interval: Hours (HH) (00 to 23)
p5 Interval: Minutes (MM) (00 to 59)
p6 Timer action
Single Single shot
Repeat Repeat
Match Time Timer That Synchronizes Once a Week
Syntax SMatchTimer,p1,p2,p3,p4,p5,p6
p1 Match time timer number (1 to 4)
p2 Type (Week)
p3 Start time: Day of week
Sun
Mon
Tue
Wed
Thu
Fri
Sat
P4 Interval: Hours (HH) (00 to 23)
p5 Interval: Minutes (MM) (00 to 59)
p6 Timer action
Single Single shot
Repeat Repeat
Match Time Timer That Synchronizes Once a Day
Syntax SMatchTimer,p1,p2,p3,p4,p5
p1 Match time timer number (1 to 4)
p2 Type (Day)
p3 Interval: Hours (HH) (00 to 23)
P4 Interval: Minutes (MM) (00 to 59)
p5 Timer action
Single Single shot
Repeat Repeat
Query SMatchTimer[,p1]?
Example Sets match time timer number 2 to a timer that
operates on 21 hours 30 minutes on April 17
every year.
SMatchTimer,2,Year,Apr,17,21,30,Re
peat
Description
• You cannot use this command to configure settings
while recording is in progress.
• You cannot use this command to configure settings
while computation is in progress.
• If p2=Off, you cannot set p3 or subsequent
parameters.
SEventAct
Event Action
Sets an event action.
Syntax SEventAct,p1,p2,p3,p4,p5,p6,p7
SEventAct,p1,p2,p3,p4,p5,p6,p7,p8
SEventAct,p1,p2,p3,p4,p5,p6,p7,p8
,p9
SEventAct,p1,p2,p3,p4,p5,p6,p7,p8,
p9,p10
p1 Event action number (1 to 50)
p2 Type (Off, On)
p3 Event type (see the table below)
P4 Source element number (see the table
below)
p5 Alarm level (see the table below)
p6 Operation mode (see the table below)
p7 Action type (see the table below)
p8 Source element number (see the table
below)
p9 Action detail 1 (see the table below)
p10 Action detail 2 (see the table below)
2.4 Setting Commands