Yokogawa Touch Screen GP20 - Manual (Page 60)

2-46
IM 04L51B01-17EN
Free Space on the External Storage Medium
Syntax FMedia,p1
p1 Output type (CHKDSK)
Example Output the free space on the external storage
medium.
FMedia,CHKDSK
Description
• For the ASCII output format, see
page 2-75 .
FCnf
Outputs Setting Data
Outputs the GX/GP setting data.
Syntax FCnf,p1
p1 Operation
ALL Read all settings.
IO Read I/O settings.
MATH Read Math settings.
COMM Read communication settings.
GROUP Read display group settings.
IP Read IP address settings.
SECURITY Read security settings.
OTHERS Read settings other than
above.
You can specify multiple items in the list above.
Separate each item with a colon (see the
example).
Example Read I/O and Math settings.
FCnf,IO:MATH
Description
• If you omit p1, all settings will be read.
• The setting data is output as the responses to the
command queries. The following table lists p1 and the
corresponding commands.
p1 Command
IO SModeAI, SModeDI, SScaleOver,
SRangeAI, SRangeDI, SRangeDO,
SMoveAve, SBurnOut, SRjc,
SAlarmIO, SAlmHysIO, SAlmDlyIO,
STagIO, SColorIO, SZoneIO,
SScaleIO, SBarIO, SPartialIO,
SBandIO, SAlmMarkIO, SValueIO,
SCalibIO
MATH SMathBasic, SKConst, SWconst,
SRangeMath, STlogMath,
SRolAveMath, SAlarmMath,
SAlmHysMath, SAlmDlyMath,
STagMath, SColorMath, SZoneMath,
SScaleMath, SBarMath,
SPartialMath, SBandMath,
SAlmMarkMath
COMM SRangeCom, SValueCom, SWDCom,
SAlarmCom, SAlmHysCom, SAlmDlyCom,
STagCom, SColorCom, SZoneCom,
SScaleCom, SBarCom, SPartialCom,
SBandCom, SAlmMarkCom
GROUP SGroup, STripLine, SSclBmp
IP SIpAddress, SDns, SDhcp
SECURITY SSecurity, SOpePass, SOpeLimit,
SUser, SUserLimit
• For the output format, see page 2-76 .
FChInfo
Outputs Decimal Place and Unit
Information
Outputs decimal place and unit information.
Syntax FChInfo,p1,p2
p1 First channel
p2 Last channel
Example Output the decimal place and unit information
of channels 0001 to 0003.
FChInfo,0001,0003
Description
• If you omit p1 and p2, all channels will be output.
• For the output format, see
page 2-76 .
FSysConf
Queries the System Configuration and
Reconfigures Modules
Queries the system configuration and reconfigures
modules.
Query the System Configuration
Syntax FSysConf
Example Query the System Configuration.
FSysConf
Description
• For the output format, see
page 2-77 .
Reconfigures Modules
Aligns the module configuration settings that are
recognized by the GX/GP and the actual module
configuration.
Syntax FSysConf,p1
p1 Module reconfiguration (1)
Example Reconfigure the modules.
FSysConf,1
2.5 Output Commands