Yokogawa Touch Screen GP20 - Manual (Page 43)

2-29
IM 04L51B01-17EN
Commands and Responses
1
2
App
P4 Data type 4 (Off, Max, Min, Ave, Sum,
Inst)
p5 Data type 5 (Off, Max, Min, Ave, Sum,
Inst)
Off No
Max Maximum value
Min Minimum value
Ave Average value
Sum Integrated value
Inst Instantaneous value
p6 File type
Combine 1 file
Separate Separate
Query SRepData?
Example Record the maximum, minimum, and average
values in daily and monthly reports. Generate
the daily and monthly reports in a single file.
SRepData,Max,Min,Ave,Off,Combine
Description
• You cannot use this command to configure settings
while recording is in progress.
• You cannot use this command to configure settings
while computation is in progress.
SRepTemp
Report Output (/MT)
Sets the report output mode.
Syntax SRepTemp,p1,p2,p3
p1 EXCEL template
Off Disabled
On Enabled
p2 PDF output (Off, On)
p3 Printer output (Off, On)
Query SRepTemp?
Example Generate reports that use the Excel template.
SRepTemp,On,Off,Off
Description
• You cannot use this command to configure settings
while recording is in progress.
• You cannot use this command to configure settings
while computation is in progress.
SRepCh
Report Channel (/MT)
Assigns a channel to a report channel.
Not Assign a Channel
Syntax SRepCh,p1,p2
p1 Report Channel Number
p2 Usage (Off)
Assign a Channel
Syntax SRepCh,p1,p2,p3,p4
p1 Report Channel Number
p2 Usage
IO I/O channel
Math Math channel
Com Communication channel
p3 Channel number
P4 Sum scale (Off, /sec, /min, /hour, /day)
Query SRepCh[,p1]?
Example Assign I/O channel 0002 to report channel 1.
Set the sum scale to Off.
SRepCh,001,IO,0002,Off
Description
• You cannot use this command to configure settings
while recording is in progress.
• You cannot use this command to configure settings
while computation is in progress.
• If p2=Off, you cannot set p3 or subsequent parameters.
• Communication channels are an option (/MC).
SLcd
LCD
Sets the brightness and backlight saver of the LCD.
Syntax SLcd,p1,p2,p3,p4
p1 Brightness (1 to 6)
p2 Backlight saver mode
Off Not used
Dimmer Dimmer
TimeOff Off
p3 Backlight saver saver time (1min, 2min,
5min, 10min, 30min, 1h)
P4 Backlight saver restore
Key+Touch Key or touchscreen
Key+Touch+Alarm Key, touchscreen, or
alarm
Query SLcd?
Example Set the LCD brightness to 3 and the screen
backlight saver type to DIMMER. Set the
amount time of until the GX/GP switches to
saver mode to 5 minutes and the event that
causes the GX/GP to return from saver mode
to the pressing of a key and tapping of the
touchscreen.
SLcd,3,Dimmer,5min,Key+Touch
Description
• p3 and subsequent parameters are valid when
p2=Off.
SViewAngle
View Angle
Set the view angle.
Syntax SViewAngle,p1
p1 View Angle
Upper Easy to view from above
Lower Easy to view from below
Query SViewAngle?
Example Set the view angle so that it is easy to view
from above.
SViewAngle,Upper
Description
• This command is valid for the GX10/GP10.
2.4 Setting Commands