Yokogawa Touch Screen GP20 - Manual (Page 78)

2-64
IM 04L51B01-17EN
Status Information 4
Bit Name Description
0 -
1 Medium access complete Set to 1 when a display, event, manual-sample,
report, or screen-image data file is saved to the
external storage medium. Set to 1 when settings
have been successfully saved or loaded.
2 Report generation complete Set to 1 when report generation is complete.
3 Timeout Set to 1 when a timer expires.
4 - -
5 - -
6 - -
7 - -
2.10.8 Alarm Summary (FLog)
The output in response to the command “FLog,ALARM” is shown below.
Syntax
EA<crlf>
yyyy/mo/dd_hh:mm:ss.ttt_kkk_cccc_lss<crlf>
…
EN<crlf>
yyyy/mo/dd_hh:mm:ss.ttt Time of alarm occurrence
yyyy Year (1900 to 2099)
mo Month (01 to 12)
dd Day (01 to 31)
hh Hour (00 to 23)
mm Minute (00 to 59)
ss Second (00 to 59)
ttt Millisecond (000 to 999)
A period is inserted between the minute and
millisecond.
kkk Alarm cause
OFF Alarm release
ON_ Alarm occurrence
ACK All channel alarm ACK
ALL All channel alarm OFF
cccc Channel number (set to four spaces if the alarm cause is
“ACK” or “ALL”)
l Alarm level (1 to 4)
ss Alarm type
H_ High limit alarm
h_ Difference high limit alarm
L_ Low limit alarm
l_ Difference low limit alarm
R_ High limit on rate-of-change alarm
r_ Low limit on rate-of-change alarm
T_ Delay high limit alarm
t_ Delay low limit alarm
2.10 ASCII Output Format