Nexo config – Nexo NUAR User Manual
Page 50
MENU DESCRIPTION
Turn the wheel to make your choice blink on the first line of the screen, then press the “B”
button.
Nexo config
Select one speaker setup by turning the wheel till the setup number appears blinking on
the LCD screen (in this example, you can toggle between the Crossover (Xover) and the
Wide setup). Then depress the B button (OK). Once the setup is loaded, the amplifier will
go back to the default screen. If you don’t want to change the current speaker setup,
simply press the A button (Back).
201. S1210 XO
RS15 CD 80 All OK
If you want to recall a setup from another family, you should first press the ‘Select 4’ (All)
button, the previous display (without “All” on screen) will be displayed, but this time all the
setup will be available when turning the wheel.
201. S1210 XO
RS15 CD 80 OK
N.B.: When changing setups inside the same speaker family, the settings of the unit (input
patch, delay, gain…) are kept. If you choose another family, settings will go back to the
default values.
PAGE 50 OF 140